Unicorn 5-200 Modular: full specifications
Every published number for the Unicorn 5-200 Modular 5-axis machining center, on one page. Values marked as design targets are verified at the factory acceptance test in mid-August 2026.2 A downloadable PDF datasheet is in preparation. Questions a table cannot answer go straight to the engineers: get price & lead time.
Last verified · changes are logged at the bottom of this page.
Structure and dimensions
| Envelope, W × H × D | 2250 × 1997 × 870 mm |
|---|---|
| Floor footprint | 2250 × 870 mm (under 2 m²) |
| Module weight | ~2,300 kg |
| Machine base | mineral casting |
| Hydraulic pressure control | WEBER-HYDRAULIK EPDRD3, HAWE HR120 |
Axes and motion
| Travels X / Y / Z | 558 / 246 / 324 mm |
|---|---|
| B axis | ±112° |
| C axis | 360° continuous |
| Feed rate | up to 36 m/min |
| Axis acceleration | 12 m/s² |
| Positioning repeatability | <±4 µm2 |
| Absolute accuracy | ±15 µm2 |
Table and workpiece
| Table | Ø200 mm |
|---|---|
| Max workpiece | Ø225 × 233 mm |
| Zero-point clamping (optional) | AMF zero-point in the C axis (6204IHA-10) |
| Automation vise (optional) | hydraulic, G-code activated; 0-160 mm standard clamping for rectangular stock; custom jaws; automated clamping options for round and irregular workpieces |
Spindle
| Spindle | IBAG, ceramic bearings |
|---|---|
| Tool interface | HSK-E32 |
| Speed range | 0-60,000 rpm |
| Air through spindle (optional) | plumbing for air-assisted and minimum-quantity machining |
Tooling
| Tool magazine | 78 + 1 tools |
|---|
Coolant and chip management
| Flood circuit (standard) | 8 bar |
|---|---|
| Coolant reservoir | ~300 L |
| Through-tool coolant (optional) | 80 bar high-pressure system |
| Mist collector (optional) | TCSM MKII-SMART, Wi-Fi monitored, with filter; €2,400 |
Probing and tool measurement (options)
| Tool setter | Renishaw NC4+ Blue F145, non-contact |
|---|---|
| Touch probe | Renishaw RMP24-MICRO |
| Probing software | Renishaw Set and Inspect + Reporter on the control |
| Rotary-axis verification | Renishaw AxiSet Check-Up (macro + PC app) |
Control
| Control | FANUC 31i-B5 Plus |
|---|
Automation interface
| Automation door | 410 × 308 mm |
|---|---|
| Robot cell | FANUC LR Mate (see the automation page) |
| Cell safety concept | designed for CE machinery compliance without physical safety barriers3 |
Platform
| Cluster size | 1 to 8 modules4 |
|---|---|
| Shared in a cluster | tool, pallet, and material handling4 |
2 Design target, to be verified at factory acceptance testing, scheduled mid-August 2026.
3 Design target. CE conformity assessment runs August to October 2026; the machine is not yet CE certified.
4 Multi-module clusters are a design target until the first reference installation is documented.
Downloads
Unicorn 5-200 Modular datasheet (PDF)
In preparation. Every published number is already on this page, no account or PDF reader needed.
- : specifications re-verified against SIMUL engineering data; metrology options updated to Renishaw NC4+ Blue F145 and RMP24-MICRO; mist collector updated to the TCSM MKII-SMART unit (optional, €2,400).
Planning a machine purchase for 2026 or 2027?
Tell us your parts and volumes. You get a price, the current lead time, and a straight answer on whether the Unicorn 5-200 Modular fits, from the engineers who build it.