Build & price
Every option has a price
The base machine is €230k.1 Every module and option that adds to it is listed below with its price, so you can work out your configuration before you talk to us.
Start with one, stack to eight
Each Unicorn 5-200 Modular is a complete 5-axis machining center. A cluster adds modules that share tool, pallet, and material handling, so you scale capacity by adding a module instead of buying a whole new machine.4 The base module is €230k;1 the price of each additional module is being finalized.
What the base machine includes
Before any option, €230k1 buys a complete machine.
- IBAG HSK-E32 spindle0-60,000 rpm, ceramic bearings
- Tool magazine78 + 1 tools
- FANUC 31i-B5 Plus control5-axis CNC control
- Flood coolant8 bar, ~300 L reservoir
- Mineral-cast basevibration damping and thermal stability
- Automation door410 × 308 mm, for robot loading
What drives the price
Module count. Each Unicorn 5-200 Modular is a complete 5-axis machining center; a cluster multiplies machine cost but shares handling infrastructure.4
The robot cell. The FANUC LR Mate automation cell is priced by configuration: part spectrum, clamping, and cycle logic.
Machining options. The 80 bar through-tool coolant system, air-through-spindle plumbing, the hydraulic G-code vise with your clamping range, the AMF zero-point system in the C axis, and the TCSM MKII-SMART oil mist collector (€2,400).
Measurement options. The Renishaw NC4+ Blue F145 tool setter, the RMP24-MICRO touch probe, and the probing software package on the FANUC control.
Tooling and delivery. HSK-E32 tooling packages, installation, and commissioning at your site.
Options and what they cost
Option prices are ex-works, before VAT, valid July 2026, and may be revised. Ask for a current quote for your configuration.
Prices shown as XXX are being finalized and appear here as they are confirmed.
Machining options
| Option | What it does | Price |
|---|---|---|
| 80 bar through-tool coolant | High-pressure coolant through the tool, for deep features and small drills | XXX |
| Air through spindle | Plumbing for air-assisted or minimum-quantity machining | XXX |
| Hydraulic G-code vise | Automated clamping, 0-160 mm standard for rectangular stock; custom jaws; round and irregular workpiece options | XXX |
| AMF zero-point in C axis (6204IHA-10) | Repeatable pallet and fixture location for robot exchange | XXX |
| TCSM MKII-SMART oil mist collector | Oil mist extraction with Wi-Fi monitoring, delivered with filter | €2,400 |
Measurement and probing options
| Option | What it does | Price |
|---|---|---|
| Renishaw NC4+ Blue F145 tool setter | Non-contact tool setting and breakage detection | XXX |
| Renishaw RMP24-MICRO touch probe | Touch probing for setup and in-process measurement | XXX |
| Renishaw Set and Inspect with Reporter | Probing software on the FANUC control | XXX |
| AxiSet Check-Up | Rotary-axis alignment verification | XXX |
Automation
| Option | What it does | Price |
|---|---|---|
| FANUC LR Mate robot cell | Lights-out part loading, priced by part spectrum, clamping, and cycle logic | Quoted per configuration |
Tooling and delivery
| Option | What it does | Price |
|---|---|---|
| HSK-E32 tooling package | Tooling matched to your parts | XXX |
| Installation | Delivery and setup at your site | Quoted per configuration |
| Commissioning | First-article and handover at your site | Quoted per configuration |
How quoting works
Send your parts and volumes through the form. You get back a configured price, the current lead time, and an honest note on anything that does not fit. Installation, commissioning, and the robot cell are quoted with the machine, itemized, so you see what each one costs. The quote comes from the engineers who build the machine, and nobody calls you unless you ask for a call.
FAQ
- What does the Unicorn 5-200 Modular cost?
- The base machine starts at €230k before options.1 A configured machine with automation lands higher; the drivers are listed on this page.
- Why publish a price at all?
- Because you screen machines on budget before you talk to anyone, and we would rather be screened accurately.
- What is the lead time?
- It moves with the build schedule, so we quote it per request instead of printing a number that goes stale. Ask and you get the current one.
- Is leasing available?
- We are preparing financing and leasing options and can discuss your case in a quote conversation; nothing is productized today. When that changes, it will say so here.
- Does the price include installation?
- Installation and commissioning are quoted with the machine, itemized, so you see what they cost.
Get your configured number
Parts, material, volumes. Send those three and you get a price and the current lead time back.
1 Entry price for the base machine before options, July 2026. Configured machines vary; ask for a current quote.
4 Multi-module clusters are a design target until the first reference installation is documented.